series am 30k-iz 30 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 8.d 1 of 5 north america only features: ? rohs compliant ? soft start ? power modules for pcb mounting ? high efficiency ? capacitive loading up to 5500 f (36 - 75v i nput) ? standard package ? remote on/off cont r ol ? uvlo / ovlo shutdown ? operating temperature range: - 40 to + 8 5oc ? th ermal shutdow n models single output model input voltage (v) output voltage (v) output current max (a) ripple & noise typ. isolation (vdc) efficiency (%) am30k - 1203siz 9 - 18 3.3 5.5 80 mv p - p 1500 81 am30k - 1205siz 9 - 18 5 5 80 mv p - p 1500 83 am30k - 1212siz 9 - 18 12 2.5 1 20 mv p - p 1500 86 am30k - 1215siz 9 - 18 15 2 1 50 mv p - p 1500 87 am30k - 2403siz 18 - 36 3.3 5.5 80 mv p - p 1500 82 am30k - 2405siz 18 - 36 5 5 80 mv p - p 1500 86 am30k - 2412siz 18 - 36 12 2.5 120 mv p - p 1500 88 am30k - 2415siz 18 - 36 15 2 150 mv p - p 1500 88 am30k - 4803siz 36 - 75 3.3 5.5 80 mv p - p 1500 82 am30k - 4805siz 36 - 75 5 5 80 mv p - p 1500 86 am30k - 4812siz 36 - 75 12 2.5 120 mv p - p 1500 88 am30k - 4815siz 36 - 75 15 2 150 mv p - p 1500 88 am30k - 1203s h30 iz 9 - 18 3.3 6 80 mv p - p 3000 80 am30k - 1205s h30 iz 9 - 18 5 5 80 mv p - p 3000 81 am30k - 1212s h30 iz 9 - 18 12 2.5 120 mv p - p 3000 84 am30k - 1215s h30 iz 9 - 18 15 2 150 mv p - p 3000 83 am30k - 12 24 s h30 iz 9 - 18 24 1.2 24 0 mv p - p 3000 82 am30k - 24 03s h30 iz 18 - 36 3.3 6 80 mv p - p 3000 80 am30k - 24 05s h30 iz 18 - 36 5 5 80 mv p - p 3000 80 am30k - 24 12s h30 iz 18 - 36 12 2.5 120 mv p - p 3000 84 am30k - 24 15s h30 iz 18 - 36 15 2 150 mv p - p 3000 83 am30k - 2424 s h30 iz 18 - 36 24 1.2 24 0 mv p - p 3000 83 am30k - 48 03s h30 iz 36 - 75 3.3 6 80 mv p - p 3000 77 am30k - 48 05s h30 iz 36 - 75 5 5 80 mv p - p 3000 82 am3 0k - 48 12s h30 iz 36 - 75 12 2.5 120 mv p - p 3000 84 am30k - 48 15s h30 iz 36 - 75 15 2 150 mv p - p 3000 85 am30k - 4824 s h30 iz 36 - 75 24 1.2 24 0 mv p - p 3000 85 models dual output model input voltage (v) output voltage (v) output current max (a) ripple & noise typ. is olation (vdc) efficiency (%) am30k - 1205diz 9 - 18 5 2.5 80 mv p - p 1500 83 am30k - 1212diz 9 - 18 12 1.25 120 mv p - p 1500 86 am30k - 1215diz 9 - 18 15 1 150 mv p - p 1500 87 am30k - 2405diz 18 - 36 5 2.5 80 mv p - p 1500 86 am30k - 2412diz 18 - 36 12 1.25 120 mv p - p 1500 88 am30k - 2415diz 18 - 36 15 1 150 mv p - p 1500 86 am30k - 4805diz 36 - 75 5 2.5 80 mv p - p 1500 86 am30k - 4812diz 36 - 75 12 1.25 120 mv p - p 1500 88 am30k - 4815diz 36 - 75 15 1 150 mv p - p 1500 88
series am 30k-iz 30 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 8.d 2 of 5 north america only models dual output (continued) model input voltage (v) output voltage (v) output current max (a) ripple & noise typ. isolation (vdc) efficiency (%) am30k - 1205d h30 iz 9 - 18 5 3 80 mv p - p 3000 81 am30k - 1212d h30 iz 9 - 18 12 1.25 120 mv p - p 3000 83 am30k - 1215d h30 iz 9 - 18 15 1 150 mv p - p 3000 83 am30k - 2 4 05d h30 iz 18 - 36 5 3 80 mv p - p 3000 83 am30k - 24 12d h30 iz 18 - 36 12 1.25 120 mv p - p 3000 85 am30k - 24 15d h30 iz 18 - 36 15 1 150 mv p - p 3000 85 am30k - 48 05d h30 iz 36 - 75 5 3 80 mv p - p 3000 84 am30k - 48 12d h30 iz 36 - 75 12 1.25 120 mv p - p 3000 85 am30k - 48 15d h30 iz 36 - 75 15 1 150 mv p - p 3000 85 i nput specifications parameters nominal typical maximum units voltage range 12 9 - 18 vdc 24 18 - 36 48 36 - 75 filter (pi) network recommended input fuse (slow blow) 12 v in 8a/250v 24 v in 4a/250v 48 v in 2a/250v remote on/off control on 3.5 to 12vdc or open circuit off 0 to 1.2vdc or short circuit between pin 2 and 4 ; typical i dle current 3ma absolute maximum ra ting 12 vin 20 vdc 24 vin 40 48 vin 80 permissible absolute maximum duration 2 h ours isolation specifications parameters conditions typical maximum units tested i/o voltage 3 sec 1 5 00 & 3000 vdc resistance > 1000 mohm output specifi cations parameters conditions typical maximum units voltage accuracy 2 % short circuit protection continuous short circuit restart auto recovery over load protection auto recovery works at 110% of rated output over voltage protection zener diode cl amp protection line voltage regulation (single) hl - ll 0.5 % line voltage regulation (dual) hl - ll 0.5 % load voltage regulation (single) 25 - 100% 0.5 % load voltage regulation (dual) 25 - 100% 2 % temperature coefficient 0.05 %/ o c voltage adju stment range 10 % general specifications parameters conditions typical maximum units switching frequency 100% load 2 5 0 khz operating temperature with derating above 70oc - 40 to + 8 5 o c storage temperature - 55 to +105 o c max imum c ase temp era ture 95 o c t h ermal s hutdown +105 +115 o c
series am 30k-iz 30 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 8.d 3 of 5 north america only general specifications (continued) parameters conditions typical maximum units cooling free air convection humidity 95 % case material nickel coated copper with non conductive base. six sided shielded weight 5 0 g dimensions (l x w x h) tolerance 0.5mm 2.00 x 1.60 x 0.40 inches 50.80 x 40.60x 10. 16 mm mtbf > 55 0 000 hrs (mil - hdbk - 217f, ground benign, t=+25 o c) soldering temperature 1.5 mm from case for 10 sec 260 o c note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. safety specifications parameters agency approvals ce standards en 55022, en 55024 class a pin out specif ications dimensions pin single dual 1 +v input +v input 2 - v input - v input 3 on/off control on/off control 4 no pin +v output 5 +v output common 6 - v output - v output 7 trim trim 1 5 . 0 8 (0 . 2 0 ) 7 . 6 2 ( 0 . 3 0 ) 1 7 . 7 8 (0 . 7 0 ) 5 . 1 0 (0 . 2 0 ) 5 . 1 0 (0 . 2 0 ) 2 3 4 5 6 7 1 0 . 1 6 (0 . 4 0 ) 1 0 . 1 6 (0 . 4 0 ) 1 0 . 1 6 (0 . 4 0 ) 1 0 . 1 6 (0 . 4 0 ) bottom view 50. 80 (2 . 00 ) 4 0 . 6 0 (1 . 6 0 ) 1 0 . 1 6 (0 . 4 0 ) ? 1 . 00 (0 . 04 ) printed face 2 . 54 (0 . 10) 5 . 6 0 (0 . 2 2 ) 45. 72 ( 1 . 80 ) case tolerance 0 . 50 ( 0 . 02) pin pitch tolerance 0 . 35 ( 0 . 014 ) dimensions mm ( inch )
series am 30k-iz 30 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 8.d 4 of 5 north america only derating 1500vdc isolati on trimming 3000vdc isolation - 40 - 20 0 20 40 60 80 100 100 80 60 40 20 0 safe operating area o u t p u t po w e r (% ) 85 ambient temperature o c a b c d b 100 lfm a free air 70 o c 75 o c c 200 lfm 80 o c d 400 lfm 85 o c - 40 - 20 0 20 40 60 80 100 100 80 60 40 20 0 safe operating area output power (%) 85 ambient temperature o c free air convection 40 o c
series am 30k-iz 30 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 8.d 5 of 5 north america only contro l on/off pin connection example single output dual output digital control circuit: control voltage on / off control -v input 0.5ma dc/dc converter npn 0v vpeak ra = vpeak C 0.6 0.5ma note: 1. datasheets are updated as needed and as such, specifications are subject to change without notice. once printed or downloaded, datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, includin g safety agency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information ar e considered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control s ystems or other such applications which necessitate specifi c safety and regulatory standards other the ones listed in this datasheet. 7. warranty is in accordance with aimtecs standard terms of sale available at www.aimtec.com.
|
